Today the library is open from: 9am-9pm
 

Loading Events

← Back to Events

Nancy D. Castle Collaboration Studio

Mon May 2019

Maker Monday: Laser Cut a Garden Stake

Mon May 13 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Monday, repeating until Tue May 21, 2019

Join us as we learn to use the free, vector design software Inkscape to design three separate garden stakes for your garden! At the end of class, we’ll laser cut your stakes to take home! This class (and the stakes!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For…

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue May 14 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed May 29, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Make a 3D Star Lantern

Tue May 14 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed May 29, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Star Lantern! After the class, we’ll 3D print out your lantern (and supply you with a tea light) to be picked up in a few days.  This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a…

Find out more »

Make a 3D Eiffel Tower (Bilingual)

Wed May 15 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Wednesday, repeating until Thu May 30, 2019

Join us as we learn to use the free, web based 3D design software TinkerCAD to design our very own Eiffel tower! After the class, we’ll 3D print out your tower to be picked up in a few days!  This class (and the 3D print!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech…

Find out more »

Open Maker Lab

Thu May 16 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Thursday, repeating until Fri May 31, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Make a 3D Planter

Thu May 16 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri May 31, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own planter pots! After the class, we’ll 3D print out your pot to be picked up in a few days.  This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first…

Find out more »

Bring You own Logic DAW

Sat May 18 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Saturday, repeating until Sun May 19, 2019

Already have a MacBook with Logic installed but need help with MIDI inputs and melody creation? Join us as we cover those topics and take your questions. You will need to have your own Macbook with Logic installed for this class! This program is for individuals 17 and up. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 2115.…

Find out more »

Maker Monday: Laser Cut a Garden Stake

Mon May 20 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Monday, repeating until Tue May 21, 2019

Join us as we learn to use the free, vector design software Inkscape to design three separate garden stakes for your garden! At the end of class, we’ll laser cut your stakes to take home! This class (and the stakes!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For…

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue May 21 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed May 29, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Make a 3D Eiffel Tower

Tue May 21 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed May 22, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Eiffel tower! After the class, we’ll 3D print out your tower to be picked up in a few days!  This class (and the 3D print!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first…

Find out more »

Make a 3D Eiffel Tower (Bilingual)

Wed May 22 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Wednesday, repeating until Thu May 30, 2019

Join us as we learn to use the free, web based 3D design software TinkerCAD to design our very own Eiffel tower! After the class, we’ll 3D print out your tower to be picked up in a few days!  This class (and the 3D print!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech…

Find out more »

Open Maker Lab

Thu May 23 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Thursday, repeating until Fri May 31, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Make a 3D Planter

Thu May 23 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri May 31, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own planter pots! After the class, we’ll 3D print out your pot to be picked up in a few days.  This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first…

Find out more »

Sound Studio Orientation

Fri May 24 @ 3:30 PM - 4:15 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Friday, repeating until Fri May 24, 2019

Interested in using our new sound studio? Please join us for one of our orientation classes. We will cover available equipment, usage policies, and behavior guidelines as well as a basic primer on equipment function. Please note you do need to be a consortium card holder 16 years old or older to use the sound studio, and attendance of an orientation class is needed before you can use the sound studio. For more information, please contact the Tech Desk at techdesk@dkpl.org or…

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue May 28 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed May 29, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Make a 3D Star Lantern

Tue May 28 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed May 29, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Star Lantern! After the class, we’ll 3D print out your lantern (and supply you with a tea light) to be picked up in a few days.  This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a…

Find out more »

Make a 3D Eiffel Tower (Bilingual)

Wed May 29 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Wednesday, repeating until Thu May 30, 2019

Join us as we learn to use the free, web based 3D design software TinkerCAD to design our very own Eiffel tower! After the class, we’ll 3D print out your tower to be picked up in a few days!  This class (and the 3D print!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech…

Find out more »

Open Maker Lab

Thu May 30 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Thursday, repeating until Fri May 31, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Make a 3D Planter

Thu May 30 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri May 31, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own planter pots! After the class, we’ll 3D print out your pot to be picked up in a few days.  This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first…

Find out more »

Sat June 2019

Audacity for Beginners

Sat June 1 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Saturday, repeating until Sun June 30, 2019

Looking to learn basic sound editing? Join us as we learn the free sound editing program Audacity. We’ll supply computers and sample files to edit. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Make Your Own Bottle Lamp (Teen)

Mon June 3 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Monday, repeating until Tue June 18, 2019

Join us as we learn how to use our vinyl cutter to personalize your very own bottle lamp! We’ll supply the bottles and lights, you supply the imagination for the lamps. This class (and the lamp) is completely free. The program is for teens going into grades 6-12. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue June 4 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed June 26, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Laser Cut a Key Chain

Tue June 4 @ 3:30 PM - 5:00 PM

Join us as we learn to use the free vector image editing software Inkscape to design our very own key chain. After you finish your design, we’ll cut them out on the laser cutter! This class (and the key chain!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For…

Find out more »

3D Design a Pokeball

Tue June 4 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed June 19, 2019

One event on Wed June 5, 2019 at 3:30 PM

One event on Wed June 12, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Pokeball! After the class, we’ll 3D print your Pokeball to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

3D Design a Pokeball

Wed June 5 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Tuesday, repeating until Wed June 19, 2019

One event on Wed June 5, 2019 at 3:30 PM

One event on Wed June 12, 2019 at 3:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Pokeball! After the class, we’ll 3D print your Pokeball to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

3D Design a Mug

Wed June 5 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue June 11, 2019 at 6:30 PM

One event on Wed June 19, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own mug! After the class, we’ll 3D print your mug to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

Studio Open Lab

Thu June 6 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Thursday, repeating until Fri June 28, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Create a 3D Printed Car

Thu June 6 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri June 28, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own car with a Pokemon driver! After the class, we’ll 3D print your car to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the…

Find out more »

Working with 3D Prints

Mon June 10 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Monday, repeating until Tue June 25, 2019

Do you want to make your 3D prints not look 3D printed? Not sure what you can use to glue or paint them with? How much sanding is really required? Join us we show you how to really make your prints shine! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional…

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue June 11 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed June 26, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Laser Cut a Key Chain

Tue June 11 @ 3:30 PM - 5:00 PM

Join us as we learn to use the free vector image editing software Inkscape to design our very own key chain. After you finish your design, we’ll cut them out on the laser cutter! This class (and the key chain!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For…

Find out more »

3D Design a Mug

Tue June 11 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue June 11, 2019 at 6:30 PM

One event on Wed June 19, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own mug! After the class, we’ll 3D print your mug to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

Teen Ice Cream Social

Wed June 12 @ 3:30 PM - 5:00 PM

I scream, you scream, we all scream for ice cream! We’ll learn how to make our own ice cream and hangout afterwards. The program is for teens (going into grades 6-12) only and will meet in the Nancy D. Castle Collaboration Studio. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

3D Design a Pokeball

Wed June 12 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed June 19, 2019

One event on Wed June 5, 2019 at 3:30 PM

One event on Wed June 12, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Pokeball! After the class, we’ll 3D print your Pokeball to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

Studio Open Lab

Thu June 13 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Thursday, repeating until Fri June 28, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Create a 3D Printed Car

Thu June 13 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri June 28, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own car with a Pokemon driver! After the class, we’ll 3D print your car to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the…

Find out more »

Zine Workshop

Fri June 14 @ 1:00 PM - 3:00 PM

Workshop collaboratively on our two magazines, one written by Tweens and one written by Teens, to get them reading for printing. Decide on the layout, choose images to enhance content, participate in editing, and decide which upcoming library teen events should be highlighted. Feel free to use the time to create content, as well. Magazine issues are printed bi-monthly and available for patrons to take. This FREE program is for students ages 13-17 or in grades 7-12. Registration is not…

Find out more »

Audacity for Beginners

Sat June 15 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Saturday, repeating until Sun June 30, 2019

Looking to learn basic sound editing? Join us as we learn the free sound editing program Audacity. We’ll supply computers and sample files to edit. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Make Your Own Bottle Lamp (Teen)

Mon June 17 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Monday, repeating until Tue June 18, 2019

Join us as we learn how to use our vinyl cutter to personalize your very own bottle lamp! We’ll supply the bottles and lights, you supply the imagination for the lamps. This class (and the lamp) is completely free. The program is for teens going into grades 6-12. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Sound Studio Navigator

Mon June 17 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue June 25, 2019

Curious about our sound studio, but not sure how to use the equipment? Or maybe you have more general questions about recording and aren’t sure where to start. Our Sound Studio Navigator is ready to assist you! Appointments are for 45 minutes (6:30-7:15 and 7:15-8:00). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact the Tech Desk at techdesk@dkpl.org or (815) 756-9568 ext. 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue June 18 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed June 26, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Laser Cut a Key Chain

Tue June 18 @ 3:30 PM - 5:00 PM

Join us as we learn to use the free vector image editing software Inkscape to design our very own key chain. After you finish your design, we’ll cut them out on the laser cutter! This class (and the key chain!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For…

Find out more »

3D Design a Pokeball

Tue June 18 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 6:30 PM on Tuesday, repeating until Wed June 19, 2019

One event on Wed June 5, 2019 at 3:30 PM

One event on Wed June 12, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Pokeball! After the class, we’ll 3D print your Pokeball to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

3D Design a Mug

Wed June 19 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue June 11, 2019 at 6:30 PM

One event on Wed June 19, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own mug! After the class, we’ll 3D print your mug to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

Studio Open Lab

Thu June 20 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Thursday, repeating until Fri June 28, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Create a 3D Printed Car

Thu June 20 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri June 28, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own car with a Pokemon driver! After the class, we’ll 3D print your car to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the…

Find out more »

Working with 3D Prints

Mon June 24 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 3:30 PM on Monday, repeating until Tue June 25, 2019

Do you want to make your 3D prints not look 3D printed? Not sure what you can use to glue or paint them with? How much sanding is really required? Join us we show you how to really make your prints shine! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional…

Find out more »

Sound Studio Navigator

Mon June 24 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue June 25, 2019

Curious about our sound studio, but not sure how to use the equipment? Or maybe you have more general questions about recording and aren’t sure where to start. Our Sound Studio Navigator is ready to assist you! Appointments are for 45 minutes (6:30-7:15 and 7:15-8:00). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact the Tech Desk at techdesk@dkpl.org or (815) 756-9568 ext. 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue June 25 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed June 26, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator Frank is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact…

Find out more »

Maker Monday: Laser Cut a Key Chain

Tue June 25 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Tuesday, repeating until Wed June 26, 2019

Join us as we learn to use the free vector image editing software Inkscape to design our very own key chain. After you finish your design, we’ll cut them out on the laser cutter! This class (and the shamrock!) is completely free! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional…

Find out more »

Make a 4th of July Banner

Tue June 25 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed June 26, 2019 at 6:30 PM

Get in the holiday spirit by making your very own 4th of July Banner! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

3D Design a Sword

Wed June 26 @ 3:30 PM - 5:00 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own mini sword! After the class, we’ll 3D print your sword to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come…

Find out more »

Make a 4th of July Banner

Wed June 26 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed June 26, 2019 at 6:30 PM

Get in the holiday spirit by making your very own 4th of July Banner! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Studio Open Lab

Thu June 27 @ 3:30 PM - 5:00 PM
|Recurring Event (See all)

An event every week that begins at 3:30 PM on Thursday, repeating until Fri June 28, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

Create a 3D Printed Car

Thu June 27 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri June 28, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own car with a Pokemon driver! After the class, we’ll 3D print your car to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the…

Find out more »

Audacity for Beginners

Sat June 29 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Saturday, repeating until Sun June 30, 2019

Looking to learn basic sound editing? Join us as we learn the free sound editing program Audacity. We’ll supply computers and sample files to edit. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Mon July 2019

Learn to make Dungeons and Dragons Terrain

Mon July 1 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Monday, repeating until Tue July 23, 2019

Are you’re an aspiring dungeon master looking to take your game up a notch? Are your Warhammer tables looking a little barren? Maybe you just like to build dioramas? Then this is the perfect class for you. Using readily available building materials, we’ll show you how to build sprawling dungeons, medieval villages and futuristic cities. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins…

Find out more »

Laser Cut a Shadowbox

Mon July 1 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue July 30, 2019

Join us as we create a Shadow box using our laser cutter. By learning to group objects and utilizing the depth effect created by relative heights, we’ll create a dramatic visual! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815)…

Find out more »

Create a 4th of July Wreath

Tue July 2 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every day that begins at 6:30 PM, repeating until Thu July 4, 2019

Create a 4th of July Wreath from common household items. It’s quick and easy and sure to make a lovely decoration in time for the holiday. The program is designed for ages 12+ or 10+ with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Create a 4th of July Wreath

Wed July 3 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every day that begins at 6:30 PM, repeating until Thu July 4, 2019

Create a 4th of July Wreath from common household items. It’s quick and easy and sure to make a lovely decoration in time for the holiday. The program is designed for ages 12+ or 10+ with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Learn to make Dungeons and Dragons Terrain

Mon July 8 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Monday, repeating until Tue July 23, 2019

Are you’re an aspiring dungeon master looking to take your game up a notch? Are your Warhammer tables looking a little barren? Maybe you just like to build dioramas? Then this is the perfect class for you. Using readily available building materials, we’ll show you how to build sprawling dungeons, medieval villages and futuristic cities. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins…

Find out more »

Laser Cut a Shadowbox

Mon July 8 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue July 30, 2019

Join us as we create a Shadow box using our laser cutter. By learning to group objects and utilizing the depth effect created by relative heights, we’ll create a dramatic visual! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815)…

Find out more »

Make a Bottle Lamp

Tue July 9 @ 6:30 PM - 8:00 PM

Join us as we learn how to use our vinyl cutter to personalize your very own bottle lamp! We’ll supply the bottles and lights, you supply the imagination for the lamps. This class (and the lamp) is completely free. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Studio Open Lab

Thu July 11 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Thursday, repeating until Fri July 19, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

3D Printed Piggy Bank

Thu July 11 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri July 26, 2019

We’ll be learning the free, online 3D design software TinkerCAD to model your very own piggy bank. After the class, we’ll 3D Print your bank to be picked up in a few days. This class (and the bank) is completely FREE. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or (815) 756-9568 ext 6103.

Find out more »

Ultimate Teen Trivia

Fri July 12 @ 10:30 AM - 12:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:30 AM on Friday, repeating until Sat July 27, 2019

Think you’re a master of trivia? Then join us for Ultimate Teen Trivia, a game that will feature questions on music, entertainment, literature, and sports! The finalists will battle for the championship. There will be prizes for the winners. The program is for teens going into grades 6-12. For additional information, please contact us at susang@dkpl.org or (815) 756-9568 ext. 2450.

Find out more »

Learn to make Dungeons and Dragons Terrain

Mon July 15 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Monday, repeating until Tue July 23, 2019

Are you’re an aspiring dungeon master looking to take your game up a notch? Are your Warhammer tables looking a little barren? Maybe you just like to build dioramas? Then this is the perfect class for you. Using readily available building materials, we’ll show you how to build sprawling dungeons, medieval villages and futuristic cities. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins…

Find out more »

Laser Cut a Shadowbox

Mon July 15 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue July 30, 2019

Join us as we create a Shadow box using our laser cutter. By learning to group objects and utilizing the depth effect created by relative heights, we’ll create a dramatic visual! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815)…

Find out more »

Teen Podcasting and Editing

Tue July 16 @ 10:00 AM - 12:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Tuesday, repeating until Wed July 31, 2019

Teens! Join us to create your very own podcast! You’ll decide what you want to discuss and record the content and then you’ll learn to edit the podcast with Audacity and post it! The program is for teens going into grades 6-12. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Fluid Art: Paint Pouring

Tue July 16 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed July 24, 2019 at 6:30 PM

One event on Wed July 31, 2019 at 6:30 PM

Learn how to use the paint pouring method to create a fluid work of art! The program is designed for ages 12 and up or 10 and up with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

DIY Animal Plush Key Chain

Wed July 17 @ 6:30 PM - 8:00 PM

Design an adorable plush keychain using the 3 basic stitches (Running, ladder, and backstitch). The program is for ages 12+ or 10+ with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Studio Open Lab

Thu July 18 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Thursday, repeating until Fri July 19, 2019

Looking for a place to work on your project? Maybe you’d just like to practice some of the skills you’ve learned in our classes? The Makerspace Open Lab is perfect for you! We’ll have a variety of supplies and computers on hand as well as knowledgeable staff members to assist you. This class is completely free. Participants must be at least 12 years old (10 and 11-year-old children are welcome with an assisting accompanying adult). Class size is limited, first…

Find out more »

3D Printed Piggy Bank

Thu July 18 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri July 26, 2019

We’ll be learning the free, online 3D design software TinkerCAD to model your very own piggy bank. After the class, we’ll 3D Print your bank to be picked up in a few days. This class (and the bank) is completely FREE. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or (815) 756-9568 ext 6103.

Find out more »

Learn to make Dungeons and Dragons Terrain

Mon July 22 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

An event every week that begins at 2:30 PM on Monday, repeating until Tue July 23, 2019

Are you’re an aspiring dungeon master looking to take your game up a notch? Are your Warhammer tables looking a little barren? Maybe you just like to build dioramas? Then this is the perfect class for you. Using readily available building materials, we’ll show you how to build sprawling dungeons, medieval villages and futuristic cities. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins…

Find out more »

Laser Cut a Shadowbox

Mon July 22 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue July 30, 2019

Join us as we create a Shadow box using our laser cutter. By learning to group objects and utilizing the depth effect created by relative heights, we’ll create a dramatic visual! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815)…

Find out more »

DIY Animal Plush Keychain

Tue July 23 @ 6:30 PM - 8:00 PM

Design an adorable plush keychain using the 3 basic stitches (Running, ladder, and backstitch). The program is for ages 12+ or 10+ with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Make a 3D Printed Phone Stand

Wed July 24 @ 2:30 PM - 4:00 PM
|Recurring Event (See all)

One event on Tue July 30, 2019 at 6:30 PM

We’ll be learning TinkerCAD—a free online 3D design program—to design your very own cell phone holder! After the class we’ll 3D print your design off for you to pick up in a few days. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org…

Find out more »

Fluid Art: Paint Pouring

Wed July 24 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed July 24, 2019 at 6:30 PM

One event on Wed July 31, 2019 at 6:30 PM

Learn how to use the paint pouring method to create a fluid work of art! The program is designed for ages 12 and up or 10 and up with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

3D Printed Piggy Bank

Thu July 25 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri July 26, 2019

We’ll be learning the free, online 3D design software TinkerCAD to model your very own piggy bank. After the class, we’ll 3D Print your bank to be picked up in a few days. This class (and the bank) is completely FREE. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or (815) 756-9568 ext 6103.

Find out more »

Ultimate Teen Trivia

Fri July 26 @ 10:30 AM - 12:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:30 AM on Friday, repeating until Sat July 27, 2019

Think you’re a master of trivia? Then join us for Ultimate Teen Trivia, a game that will feature questions on music, entertainment, literature, and sports! The finalists will battle for the championship. There will be prizes for the winners. The program is for teens going into grades 6-12. For additional information, please contact us at susang@dkpl.org or (815) 756-9568 ext. 2450.

Find out more »

Magazine Workshop

Fri July 26 @ 1:00 PM - 3:00 PM

Work collaboratively on our tween and teen magazine layouts to get them ready for printing. You choose images to enhance content, participate in editing, and decide which upcoming library events to highlight. Feel free to use the time to create content, as well. Magazine issues are printed bi-monthly and available for patrons to take. This FREE program is for students ages 12-17 or rising to grades 7-12. Registration is not required. For additional information, please contact Susan at susang@dkpl.org or…

Find out more »

Laser Cut a Shadowbox

Mon July 29 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue July 30, 2019

Join us as we create a Shadow box using our laser cutter. By learning to group objects and utilizing the depth effect created by relative heights, we’ll create a dramatic visual! Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815)…

Find out more »

Teen Podcasting and Editing

Tue July 30 @ 10:00 AM - 12:00 PM
|Recurring Event (See all)

An event every 2 weeks that begins at 10:00 AM on Tuesday, repeating until Wed July 31, 2019

Teens! Join us to create your very own podcast! You’ll decide what you want to discuss and record the content and then you’ll learn to edit the podcast with Audacity and post it! The program is for teens going into grades 6-12. For additional information, please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Make a 3D Printed Phone Stand

Tue July 30 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue July 30, 2019 at 6:30 PM

We’ll be learning TinkerCAD—a free online 3D design program—to design your very own cell phone holder! After the class we’ll 3D print your design off for you to pick up in a few days. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org…

Find out more »

Fluid Art: Paint Pouring

Wed July 31 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed July 24, 2019 at 6:30 PM

One event on Wed July 31, 2019 at 6:30 PM

Learn how to use the paint pouring method to create a fluid work of art! The program is designed for ages 12 and up or 10 and up with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Thu August 2019

3D Printed Treasure Box

Thu August 1 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri August 9, 2019

Join us as we learn the free, web-based 3D design software TinkerCAD to design and 3D Print a Treasure Box. It’s perfect for storing all sorts of tiny keepsakes such as coins, marbles, gemstones, and jewelry. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Teen Mud Volcano

Fri August 2 @ 11:00 AM - 12:00 PM

Do you enjoy gummy worms, cookies, and volcanoes? Come enjoy a snack that includes all your favorites. Prep each each layer of the volcano and devour it like lava! Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Mixed Media Art

Mon August 5 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue August 27, 2019

By using a variety of media on a canvas, we’ll create a stunning piece of art sure to impress your friends! Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue August 6 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed August 28, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact the…

Find out more »

Fluid Art: Paint Pouring

Tue August 6 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue August 20, 2019 at 6:30 PM

Learn how to use the paint pouring method to create a fluid work of art. The program is designed for ages 12 and up, or 10 and up with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

3D Design a Sword

Wed August 7 @ 2:30 PM - 4:00 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own mini sword! After the class, we’ll 3D print your sword to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come…

Find out more »

3D Design a Pokeball

Wed August 7 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Wed August 21, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Pokeball! After the class, we’ll 3D print your Pokeball to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first…

Find out more »

3D Printed Treasure Box

Thu August 8 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri August 9, 2019

Join us as we learn the free, web-based 3D design software TinkerCAD to design and 3D Print a Treasure Box. It’s perfect for storing all sorts of tiny keepsakes such as coins, marbles, gemstones, and jewelry. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext. 6103.

Find out more »

Mixed Media Art

Mon August 12 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue August 27, 2019

By using a variety of media on a canvas, we’ll create a stunning piece of art sure to impress your friends! Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue August 13 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed August 28, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact the…

Find out more »

3D Printed Desk Caddy

Wed August 14 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue August 27, 2019 at 6:30 PM

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own Desk Caddy! After the class, we’ll 3D print your Desk Caddy to be picked up in a few days. This class (and the 3D print!) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first…

Find out more »

3D Print Candle Holder

Thu August 15 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Thursday, repeating until Fri August 30, 2019

Join us as we learn to use the free, web-based 3D design software TinkerCAD to design our very own 3D Printed Candle Holder! After the class, we’ll 3D print your candle holder to be picked up in a few days. This class (and the 3D print) is completely free. Participants need to be at least 12 years old (10 and 11-year-olds are welcome with an assisting accompanying adult). Class size is limited, sign-up begins a half-hour before class at the…

Find out more »

Mixed Media Art

Mon August 19 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

An event every week that begins at 6:30 PM on Monday, repeating until Tue August 27, 2019

By using a variety of media on a canvas, we’ll create a stunning piece of art sure to impress your friends! Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »

Cyber Navigator: Personalized Tech Assistance

Tue August 20 @ 10:00 AM - 11:30 AM
|Recurring Event (See all)

An event every week that begins at 10:00 AM on Tuesday, repeating until Wed August 28, 2019

Need help with your phone, tablet or computer? Have questions about setting up a Facebook account or getting on Twitter? Our Cyber Navigator is ready to assist you! Please note that the Cyber Navigator can not help with issues involving sensitive personal data or device repair. Appointments are for 45 minutes (10-10:45 and 10:45-11:30). If there is an open time-slot, walk-ins will be available on a first come, first-serve basis. For questions, or to make an appointment, please contact the…

Find out more »

Fluid Art: Paint Pouring

Tue August 20 @ 6:30 PM - 8:00 PM
|Recurring Event (See all)

One event on Tue August 20, 2019 at 6:30 PM

Learn how to use the paint pouring method to create a fluid work of art. The program is designed for ages 12 and up, or 10 and up with an accompanying adult, and for all skill levels. Class size is limited, sign-up begins a half-hour before class at the Tech Desk—first come first serve. For more information please contact the Tech Desk at techdesk@dkpl.org or at (815) 756-9568 ext 6103.

Find out more »
+ Export Events